FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby JOHN WALKER » Sat Aug 19, 2017 12:42 am

Have set up interval set. . . Target Watts 230 - workout time 10 mins etc.
Turn Newton on to setting to climate. Hold right arrow >> Select user >> Click Center Button.
Display shows the 10 second count down. I start to ride and 10 second count down starts.
the first set is displayed and time 10 mins does not move for anywhere between 3 to 12 mins.
this happens when using trainer and on rode. It use to go straight into the set.
I have tried pressing centre and arrow buttons. I have cancelled the ride and started again.
but still freezes after the 10 second count down.
I have checked everything , but must be missing a link for it to work.
JOHN WALKER
 
Posts: 29
Joined: Sun Feb 06, 2011 2:17 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby Velocomp » Sun Aug 20, 2017 11:14 am

It sounds like your programmed interval sets are somehow not correct.

I would use Isaac to create a new interval set, then load that into your Newton.
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4334
Joined: Fri Jan 11, 2008 9:43 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby JOHN WALKER » Mon Aug 28, 2017 7:57 pm

Hi John,

I have updated the interval sets, I also removed one my bikes.
went for a ride and after the 10 seconds count down, the start of the interval froze.
after 13 mins plus so many seconds the timer started.

I reloaded the intervals again and again start ride , but freezes after 10 second count down.

mmm, so I decided to try the fat burning , cardio and strength pre-programs.
again 10 seconds counts down , but then freezes.
JOHN WALKER
 
Posts: 29
Joined: Sun Feb 06, 2011 2:17 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby Velocomp » Tue Aug 29, 2017 12:30 am

Something is wrong, but I don't know what.

I have FW 515 (latest production FW) in my Newton and everything works just fine.

Please post a ride file from a recent ride. Perhaps that will shed some light on things.
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4334
Joined: Fri Jan 11, 2008 9:43 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby JOHN WALKER » Fri Sep 01, 2017 1:40 pm

Hi John,

Attached file, Hope i did it right.

The interval entered was : 10min ( warm up , 2 mins rest , 5mins then 2 mins rest , etc
so I started ride: 10 secs count down ( yes) , then freeze. I stopped after 50 secs say, and I ended session.
re-scanned device for bike ( just because) and started interval procedure again . 10 secs count down -
freeze and after about 13 secs, it started the 10 min warm up. and everything worked fine for the whole session.

p.s. a great device you have invented, congratulations - a very happy ibike fan
Attachments
iBike_08_31_2017_0744_26_km_HiDef.csv
E3 STRENGTH ENDURO ERGO
(434.88 KiB) Downloaded 5 times
JOHN WALKER
 
Posts: 29
Joined: Sun Feb 06, 2011 2:17 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby JOHN WALKER » Fri Sep 22, 2017 5:13 am

Hi John

You must have a magic wand, because it is now working and have tried it out on different intervals and
cannot fault.

Have a fun day

John
JOHN WALKER
 
Posts: 29
Joined: Sun Feb 06, 2011 2:17 am

Re: FIT TRAIN - USER-PROGRAMMED INTERVAL SETS

Postby Velocomp » Fri Sep 22, 2017 6:03 am

:-)
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4334
Joined: Fri Jan 11, 2008 9:43 am


Return to Newton Technical Support

Who is online

Users browsing this forum: No registered users and 1 guest