Loww Low outputs

Loww Low outputs

Postby JoseJ » Tue Oct 21, 2014 1:19 pm

Hello lately I have ugraded to Newton 5, since then It is hard to hold my watts, the harder I push the lower even with ftp intervals, it seems to me that the device shows low and low watts. May be I did something wrong with my cal ride.
Could please somebody help me to set it?I am attaching my last ride
iBike_21_10_2014_0937_52_km.ibr
(295.97 KiB) Downloaded 106 times

Something else when I whant to change my profile manually the screen shows something like this -------W
And I can not change my profile
Thank you very much
JoseJ
 
Posts: 51
Joined: Sun Sep 08, 2013 5:11 pm

Re: Loww Low outputs

Postby JoseJ » Tue Oct 21, 2014 1:25 pm

I am correcting the ride with Isaac and when entereing the right altitude the watts go right as they should be.
So. Is it adviseble to enter current altitude prior to a ride?
Thank you
JoseJ
 
Posts: 51
Joined: Sun Sep 08, 2013 5:11 pm

Re: Loww Low outputs

Postby Velocomp » Tue Oct 21, 2014 5:51 pm

It looks like your profile is "off".

Load the attached profile into your Newton and see if this improves things.
Attachments
Orca_JRH.ibp
(543 Bytes) Downloaded 111 times
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4269
Joined: Fri Jan 11, 2008 9:43 am

Re: Loww Low outputs

Postby JoseJ » Fri Oct 24, 2014 6:53 am

Yes...now it works great...i have even higher watts than ever before
did the changes you made afect the profile 2 as well?
thank you John
JoseJ
 
Posts: 51
Joined: Sun Sep 08, 2013 5:11 pm

Re: Loww Low outputs

Postby Velocomp » Fri Oct 24, 2014 10:00 am

JoseJ wrote:Yes...now it works great...i have even higher watts than ever before
did the changes you made afect the profile 2 as well?
thank you John


No, the changes affect only the profile that is used. Each profile needs to be changed individually.
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4269
Joined: Fri Jan 11, 2008 9:43 am


Return to iBike Features

Who is online

Users browsing this forum: No registered users and 1 guest

cron