Setting Elevation correction

Setting Elevation correction

Postby sequimboy » Fri Sep 15, 2017 2:25 pm

I am trying to correct the elevation settings in my powerpod. I have tried to use Isaac ->tools>repair> set atmospheric pressure but it will not accept my personal wunderground station. Airports are much lower than me but it doesn't seem to use those accurately. The simplest would be to enter my stating elevation into isaac and let it do the adjustment like my edge 800 does. Anyway how can I adjust my elevation.

Thanks in advance
Attachments
pressure.JPG
Can't figure out how to use this
pressure.JPG (32.75 KiB) Viewed 138 times
elevation.JPG
Peak should be 450 ft
elevation.JPG (10.32 KiB) Viewed 138 times
sequimboy
 
Posts: 3
Joined: Thu Sep 14, 2017 7:56 pm

Re: Setting Elevation correction

Postby Velocomp » Fri Sep 15, 2017 2:30 pm

Use the Isaac command Analyze/Analyze Device Settings/Starting Elevation"
John Hamann
Velocomp
Velocomp CEO
 
Posts: 4319
Joined: Fri Jan 11, 2008 9:43 am

Re: Setting Elevation correction

Postby sequimboy » Fri Sep 15, 2017 9:19 pm

Thanks it worked!
sequimboy
 
Posts: 3
Joined: Thu Sep 14, 2017 7:56 pm


Return to Isaac software

Who is online

Users browsing this forum: No registered users and 1 guest